As one of the most used rooms in the house, bathroom remodeling requires careful planning for the best bathroom design. Building code requirements, complexity of bathroom plumbing, and other important considerations make do it yourself bathroom remodeling a challenging undertaking. Many DIY bathroom remodeling homeowners depend on a reliable bathroom contractor or contractor handyman to help with at least some aspects of the project. The helps to ensure residential building code requirements will be met, and avoid costly errors.
Basic Standard Building Code Requirements : While building code requirements need to be checked a local level, there are some bathroom design requirements that fall under standard building code guidelines. Some of these basic requirements are:
* Toilet enclosures – bathroom stall enclosures must have at least 36” X 66” of space
* Toilets – center at least 15” from walls and tubs; 21” clearance in front.
* Faucets –for bathroom shower and combination tub/showers must include anti-scald devices
* Bathroom Light fixture – at least one that is permanent, controlled by a wall switch
* Wall switch – at least 60” from tub and showers
* Waste and drain lines – must slope ¼” per foot toward the main DWV stack; to aid flow and prevent blockage.
* All receptacles must be GFCI-protected
For full residential building code requirements in your area, check with your local Department of Building and Safety.
Start a Bathroom Remodeling Planner : If you design your own bathroom, start a bathroom remodeling planner to keep notes, ideas, and important aspects of your bathroom remodeling plans. Follow the steps below for planning success:
Basic Standard Building Code Requirements : While building code requirements need to be checked a local level, there are some bathroom design requirements that fall under standard building code guidelines. Some of these basic requirements are:* Toilet enclosures – bathroom stall enclosures must have at least 36” X 66” of space
* Toilets – center at least 15” from walls and tubs; 21” clearance in front.
* Faucets –for bathroom shower and combination tub/showers must include anti-scald devices
* Bathroom Light fixture – at least one that is permanent, controlled by a wall switch
* Wall switch – at least 60” from tub and showers
* Waste and drain lines – must slope ¼” per foot toward the main DWV stack; to aid flow and prevent blockage.
* All receptacles must be GFCI-protected
For full residential building code requirements in your area, check with your local Department of Building and Safety.
Start a Bathroom Remodeling Planner : If you design your own bathroom, start a bathroom remodeling planner to keep notes, ideas, and important aspects of your bathroom remodeling plans. Follow the steps below for planning success: